You most likely will not notice that your gutters need cleaning until there is a problem with the water draining off your roof. Water may be coming off the side of the gutters because they are so filled, or clogged downspouts cause gutters to overflow. Instead of frequently cleaning your gutters throughout the year, consider using some techniques that will help prevent the clogs from happening.
What Are Downspout Screens?
Sometimes all you need is a downspout screen. This simple device is designed to fit inside your downspout, and it will stop bigger items like leaves from getting stuck inside it. These screens will still let the small dirt and debris pass through, which will be impossible to cause a clog in the downspout.
How Do I Install Downspout Screens?
The installation process of a downspout screen is very easy, though they will need to be installed at the top of the downspout. A downspout screen will form a bulb shape, and usually are held in place by tension. The bulb side sticks up, preventing debris from resting in the top of the downspout.
Some people make the mistake of installing them like a sink strainer, but this will only allow bigger debris to collect at the top of the downspout. An incorrect installation might actually require more frequent cleanings.
What Is Gutter Guard?
If you have gutters that manage to collect a significant amount of debris, gutter guards might be the solution for your home. They work by installing a specialty cover over the gutters, which will prevent debris from building up. The gutter guard can be as simple as a mesh screen, or a sophisticated plastic that allows water to flow in through a small slit.
How Do I Install A Gutter Guard?
The great thing about gutter guards is that the installation process is minimal. Most gutter guards are designed to simply snap to the outside edge of your gutter, with the inside edge resting underneath your shingles. Some gutter guards might require clips to be placed on the outside edge of the gutter, or be fastened with metal screws.
The hardest part of the installation process will be measuring and cutting your gutter guards, as you will need to measure the gutters from edge to edge. Since the gutter guards snap on, you must make sure there is no overlap, or an exposed edge can cause the gutter guard to be ripped off by heavy wind.
While these solutions will not completely eliminate needing to clean your gutters, it will help with making less frequent trips up to your roof to get rid of that excess debris that is causing clogs. Consider calling for a gutter repair technician should you need help along the way.